OEM Alkaline Battery Manufacturer In Vietnam

2026-10-10 15:25:01

If you are sourcing private-label or OEM alkaline batteries and want production outside China, Vietnam is worth a place on your supplier shortlist.

Key takeaways

  • Compare capacity figures only at the same test load. HW Energy's published AA figure (3,000 mAh) is measured at 10 mA, a light continuous load.
  • For EU-bound packs, labelling rules have applied since 18 August 2026, and the QR code and removability rules follow on 18 February 2027. Put them into your artwork brief now.
  • Ask for plant-level evidence (certificates, inspection data, leakage test results), not just group-level claims.

Why OEM buyers look at Vietnam for alkaline batteries

The main reason is supply-chain diversification: buyers who source alkaline cells from a single country want a second origin without giving up scale. The second reason is location. In Hai Phong, DEEP C Industrial Zones is a Belgian-developed estate of five industrial parks covering 3,400 hectares, and its third park sits beside the Lach Huyen deep-sea port (Vietnam Investment Review). Shorter inland legs to a deep-water port help export-heavy products such as batteries.

The estate also runs its own power network. DEEP C has been adding solar, wind and waste-to-energy sources to that network and has stated a goal of covering 50% of its electricity demand from renewables by 2030. For a buyer who reports supply-chain emissions, this matters more than it first appears. Ask any supplier in the zone what share of its actual consumption is covered, because a park-level target is not a plant-level figure.

HW Energy at a glance

HW Energy's primary battery plant in the DEEP C Industrial Zone was declared fully operational on May 8, 2025, after the project broke ground in November 2024. The company says it first shipped bulk export orders in May 2025. It describes the site as the largest integrated zinc-manganese battery base in Southeast Asia; that is its own positioning, and I could not verify it against independent industry data.

Table 1. HW Energy company facts (as stated on hwenergy.vn)
ItemStated detailWhere to check
InvestmentUS$50 million+, from HW International SingaporeAbout
Floor area55,000+ m² (the plant news release cites nearly 50,000 m² of manufacturing space)About, News
Production lines14 high-speed lines, 1,000+ machinesSmart Manufacturing
Annual capacity2 billion+ cells (alkaline and carbon-zinc combined)Smart Manufacturing
Product rangeAlkaline and carbon-zinc in AAA, AA, C, D and 9VProduct
R&DTwo R&D centers (about 2,500 m², 200+ instruments), 50+ product technology patentsR&D
Certifications shownISO 9001, ISO 14001, C-TPAT, WCACertification
Raw material sourcingBelgium, France, Japan, South Korea, China and VietnamAbout

One detail deserves a closer read: the 14 lines and the 2-billion-cell capacity cover both chemistries, so the alkaline-only capacity available to your program is smaller. Ask for the allocation by chemistry and size when you request a quote.

HW Energy primary battery manufacturing plant in Hai Phong, Vietnam

Image: HW Energy Hai Phong plant (company-owned image from hwenergy.vn).

Reading the alkaline datasheet correctly

HW Energy's alkaline cells use a manganese dioxide cathode, a zinc anode and a steel can. The five models below are the published sizes. Each links to its product page for the full specification.

Table 2. HW Energy alkaline range: published specifications (nominal 1.5 V except 9V; operating range -20 °C to 45 °C)
Model (IEC / ANSI)Height × diameterWeightCapacityTest load (24 h/day, 20 °C, 0.8 V end)
AAA LR03 / 24A43.3–44.5 × 9.5–10.5 mmabout 11 g1,300 mAh10 mA
AA LR6 / 15A49.2–50.5 × 13.5–14.5 mmabout 23 g3,000 mAh10 mA
C LR14 / 14A49.5–50.5 × 25.2–26.2 mmabout 64 g7,500 mAh25 mA
D LR20 / 13A59.0–61.5 × 32.3–34.2 mmabout 130 g18,000 mAh25 mA
9V 6LR61 / 1604A (9 V)not listed on the pageabout 44 g550 mAh35 mA

Three practical points follow from this table:

  1. The test loads differ by size, so the capacities cannot be ranked against each other. A 10 mA continuous drain is gentle. If your device is a toy, a torch or a speaker, ask for results under the intermittent high-drain test that resembles it, and judge the cell on that.
  2. Print only what the datasheet supports. The operating range on your pack should match the range the manufacturer will certify, which for HW Energy's alkaline range is -20 °C to 45 °C.
  3. Check the standard edition. IEC 60086-2 sets dimensions, discharge test conditions and performance requirements for these cell types. Its current edition is the 2021 one, and a second corrigendum appeared in March 2026. Confirm which edition your supplier tests against (EU Joint Research Centre summary).
HW Energy AA LR6 alkaline battery

Image: HW Energy AA LR6 (company-owned image from hwenergy.vn).

How the OEM process works

HW Energy's support page lays out a five-step path: jacket and packaging design, sample confirmation, production, quality inspection and delivery. The company says it will review a customer's existing designs and packaging specifications and adapt them for manufacture. Packaging formats on the product pages include blister card, paper card, paper box, shrink wrap, plastic box and industrial packs, and the FAQ adds hang-tag and all-paper options.

For planning, the FAQ gives a lead time of 90 days for a first order and 60 days for repeat orders. Treat that as roughly 13 weeks before sea freight, and schedule sample approval and artwork sign-off ahead of it. Artwork that fails a regulatory check after the production slot is booked is an avoidable way to lose weeks.

What to check before you sign: a supplier evaluation checklist

The checklist below applies to any OEM alkaline supplier in Vietnam. The right-hand column shows what HW Energy publishes on each point, so you can see where the claim is public and where you still need to ask.

Table 3. OEM alkaline supplier checklist
AreaAsk forWhy it mattersHW Energy publishes
Quality systemCurrent certificates with the plant address and scopeA group certificate may not cover the plant that makes your cellsISO 9001, ISO 14001, C-TPAT, WCA shown on About
In-line inspectionInspection plan and reject dataDefects found in-line cost far less than field returns50+ inspection points using infrared sensors, machine vision, weighing and electrical tests (details)
Leakage controlSeal design, crimp monitoring, accelerated-aging resultsLeakage is the failure your end customers will notice firstA technical article on seals, electrolyte formulation and process controls
LaboratoryEquipment list and who performs third-party testsIndependent results are stronger evidence than in-house onesAtomic absorption, ICP and X-ray equipment listed on R&D
TraceabilityBatch coding and recall procedureLets you isolate a bad lot without pulling a whole season of stockDescribes data-driven traceability; ask how batch codes map to packs
Packaging flexibilityFormats, minimums and artwork turnaroundRetail and e-commerce channels need different packsBlister, paper card, box, shrink wrap and industrial packs shown on each product page
Minimum order quantityMOQ by size and packaging typeDrives your cash tied up in the first orderNot published; request it in your inquiry

The seal and leakage question deserves extra weight. HW Energy's own article explains that alkaline leakage starts with hydrogen pressure building inside the cell, so the controls that matter most are seal geometry, anode formulation and crimp consistency. Ask any supplier to show how those three are monitored on the line, and request accelerated-aging data at elevated temperature. If a supplier cannot answer in specifics, treat that as information.

Compliance dates that affect your artwork and paperwork

The EU's Regulation (EU) 2023/1542 replaced the older Batteries Directive and covers general-purpose portable batteries such as AA, AAA and 9V. It continues the mercury and cadmium restrictions, sets a cadmium limit of 0.002% by weight for portable batteries, and, from 18 August 2024, limits lead to 0.01% (Bureau Veritas summary). Labelling is where OEM brands most often get caught.

Table 4. EU Battery Regulation milestones relevant to alkaline OEM programs
DateMilestoneWhat to do
18 Aug 2024Lead limit of 0.01% for portable batteriesObtain a material declaration or test report from the supplier
18 Aug 2026 (now in effect)Labelling requirements apply fullyConfirm your pack artwork carries the required marks; non-rechargeable cells also carry a minimum average duration label for specific applications (CDX summary)
18 Feb 2027QR code requirement; removability and replaceability of portable batteries in appliancesPlan QR placement with your packaging designer; device makers review product design (TÜV summary, CAICT timeline)

Dates and scope differ by battery category and by member state, so check the regulation text for your exact product before finalizing artwork. HW Energy states that its products are mercury- and cadmium-free and that it can make carbon-zinc cells that meet the latest EU rules (company guide, FAQ). Ask for the supporting test reports and request them in your own name, since a statement on a website is not a compliance file. Its sustainability page also lists Nordic Swan Ecolabel and FSC packaging credentials; confirm the scope of each against the products you are buying.

Reading sustainability claims with care

The HW Energy ESG page reports a 78% cut in Scope 1 and 2 emissions against a 2019 baseline, 66 Mt of avoided customer emissions and 5.9% of waste sent to landfill. The plant opened in 2025, and the page ties these figures to HW Group indicators without stating whether they describe the Vietnam plant. If your customers ask for supply-chain data, request plant-level numbers and the calculation method before using any of them in your own reporting.

How to request a quote that gets a useful answer

Send these inputs in your first message, and the quote and sample timeline will be faster and more accurate:

  • Sizes and chemistry (for example AA LR6 alkaline, or AAA R03P heavy duty as a lower-cost line).
  • The device and its typical current draw, so the supplier can recommend a test load.
  • Target markets, so labelling and regulatory documents are scoped correctly.
  • Packaging format, pack counts and print-ready artwork or a design brief.
  • Annual volume, first-order quantity and required delivery window.
  • Documents you need: certificates, test reports and material declarations.

If you are unsure whether alkaline or carbon-zinc fits your product, the company's comparison guide and the Heavy Duty range cover the trade-offs by drain level.

Frequently asked questions

Are there OEM alkaline battery manufacturers in Vietnam that also make carbon-zinc?

Yes. HW Energy says its Hai Phong plant produces both chemistries, and describes this as unique in Southeast Asia (About). That can simplify procurement if you sell good-better-best ranges under one brand.

What lead time should I plan for?

The FAQ states 90 days for a first order and 60 days for repeat orders. Add shipping time and your own artwork approval.

Can I use my own packaging design?

The company says it welcomes existing designs and specifications and offers heat-shrink, hang-tag, blister and all-paper packaging (Support).

Which standard governs alkaline battery sizes and discharge testing?

IEC 60086-2 covers physical dimensions, discharge test conditions and performance requirements for primary batteries. Ask your supplier which edition it tests against.